Configure 450 Series Cylinder
450 Series Cylinder configurator
Enter valid model number or use configurator below to generate a valid number.

Please Configure a model number using attribute below
* Indicates a required attributes. 0 of 0   required attributes selected.
Model Number Generator
G 450 A       '0001'  
Blue Attributes Indicate ASCO Numatics Express Components
 
Bore Size (mm)
3 = 32 mm 4 = 40 mm
5 = 50 mm 6 = 63 mm
8 = 80 mm 1 = 100 mm
P = 125 mm Q = 160 mm
R = 200 mm

Rod Option 1
S = Hard chromed single rod
2 = Hard chromed through rod
3 = Stainless Steel single rod
4 = Stainless Steel through rod
6 = Aisi 316 stainless Steel single rod
7 = Aisi 316 stainless Steel through rod

Rod Option 2
K = No Options
3 = Mounted with Static rod Locking device
4 = Mounted with Static rod Locking device & manual override
5 = Mounted with Dynamic rod Locking device
6 = Oversized rod
8 = Mounted with Rod Bellow
T = Tenon Rod
 
Stroke (mm)
Range [0005-2000]

Options
A00 = Without Option
FMT: With fixed mounted Centre Trunnion (Axis perpendicular to the ports)
FST: With fixed mounted Centre Trunnion (Axis parallel to the ports)
EPX = Epoxy tube
UCG = Plain bearings "U" Guiding Unit
HCG = Plain bearings "H" Guiding Unit
HBG = Ball bearings "H" Guiding Unit
AT1 = ATEX 1/21 zones
AT2 = ATEX 2/22 zones
HTP = High Temperature
FPM = FPM seals for corrosive ambiance
FFP = FPM rod seal only
NPC = Covers prepared for applications in corrosive environment
MMT = With non groved profiled tube
MT4 = With Mounted Centre Trunnion but not fixed (orientation: Centre Trunnion axis perpendicular to the ports)
MS4 = With Mounted Centre Trunnion but not fixed (orientation: Centre Trunnion axis parallel to the ports)
LFS = Low Friction Piston Seal
STN = Stainless steel cover nuts & tie rods (no tie-rod in MMT option and MMT combos)
NCS = Not Cushioned piston
TAN = Tandem, double force, linked rods
01A: With Rod Overlength
01R: With Special Rod Thread, without rod nut (tenon rod, special threads,...)
 

 
Product Information