Configure 453 Series Cylinder
453 Series Cylinder configurator
Enter valid model number or use configurator below to generate a valid number.

Please Configure a model number using attribute below
* Indicates a required attributes. 0 of 0   required attributes selected.
Model Number Generator
G 453 A       '0001'  
Blue Attributes Indicate ASCO Numatics Express Components
 
Bore Size (mm)
3 = 32 mm
4 = 40 mm
5 = 50 mm
6 = 63 mm
8 = 80 mm
1 = 100 mm

Rod Options 1
S = Hard chromed
2 = Hard chromed through rod
3 = Stainless Steel
4 = Stainless Steel through rod
6 = Aisi 316 stainless Steel
7 = Aisi 316 stainless Steel through rod

Rod Options 2
K = No Options
5 = Mounted with Dynamic rod Locking device
3 = Mounted with Static rod Locking device
4 = Mounted with Static rod Locking device & manual override
6 = Oversized rod
8 = Mounted with Rod Bellow
T = Tenon Rod
 
Stroke (mm)
Range [0005-2000]

Options
A00 = Without Option
MT4 = Mounted Centre Trunnion but not fixed (orientation: Centre Trunnion axis perpendicular to the ports)
MS4 = Mounted Centre Trunnion but not fixed (orientation: Centre Trunnion axis parallel to the ports)
UCG = Plain bearings "U" Guiding Unit
HCG = Plain bearings "H" Guiding Unit
HBG = Ball bearings "H" Guiding Unit
AT1 = ATEX 1/21 zones
AT2 = ATEX 2/22 zones
HTP = High Temperature
FPM = FPM seals for corrosive ambiance
FFP = FPM rod seal only
NPC = Covers prepared for applications in corrosive environment
SCN = Stainless Steel Covers Nuts
LFS = Low Friction Piston Seals
NCS = Not Cushioned piston
TAN = Tandem, double force, linked rods
With fixed mounted Centre Trunnion (orientation: Centre Trunnion axis perpendicular to the ports)
With fixed mounted Centre Trunnion (orientation: Centre Trunnion axis parallel to the ports)
With rod overlength
With Special Rod Thread
 

 
Product Information