WG Series The WG Series, (double guided wedge parallel grippers), achieves synchronous motion with a double acting piston attached via the piston shaft to a double sided wedge. The double sided angles of the wedge convert vertical motion to synchronous horizontal motion of the jaws. The Double Guided Wedge Parallel Grippers Unit can be slightly pressurized via the purge port to prevent debris or coolant from entering. Vacuum can also be applied.
AG Series The AG Series angular gripper utilizes a double acting piston with a dual pivot system. The piston has a single center pivot that drives each gripper jaw open and closed. The gripper jaws have an independent stationary pivot which each jaw arcs about. The ratio between the piston and jaw pivots has been optimized for maximum operating performance. The AG series angular gripper is a cartridge style design. The cartridge design utilizes a minimum number of components, seven major components in all. The cartridge design offers the greatest grip force to size ratio over other conventional designs.
MPG5 Series The MPG5 Series gripper is designed for pick & place of small pieces. The cutting edge design of the MPG5 allow for manifold mounting a series of MPG5s in line without the concerns of space for fittings or airlines. Another unique feature of the MPG5 is the dual-purpose purge port that is part of every gripper. This feature facilitates use of the MPG5 in some clean room applications and very dirty environments.
NRG Series The NRG series gripper offers both synchronized and compliant (non-synchronized) movement. Synchronized Motion: Two opposing pistons share a common bore. Each piston transfers force and motion.
PG Series The PG series is low profile with true parallel motion that is generated by a pinion mechanism powered by a double acting piston. Body: Hardcoat Anodized, Teflon impregnated inside & out. 2 different strokes same size low profile with true parallel motion that is generated by a pinion mechanism powered by a double acting piston.
TJ Series The TJ Series grippers provide high grip force in a compact design. Shielded design make the TJ series ideal for machine loading and unloading. Compact design, to grip force ratio are ideal for confined work areas.
PG6J80 Series The PG6J80 Series 6 finger gripper design utilizes a dual acting piston to open and close gripper jaws. All six jaws are synchronized for accurate positioning. The included ejectors operate independent of the gripper jaws, providing a convenient method to strip parts from the jaws. An example of this could be, expanding an o-ring and pushing it on to the desired part.
WBG Series The WBG series utilizes independent pistons to power the jaws open and closed. Jaws utilize a rack & pinion for synchronization which are independent from force rods and support rods.
GR Series The GR-Series has a double acting piston attached to a cross bar by a connecting rod. The linear movement of the piston is transformed into angular movement of the jaws through a double toggle link mechanism.
RPG Series The RPG series has true parallel motion that is generated by a double acting piston attached to the pinion mechanism with a linkage that is guided in the body for precise centering.
